Enterasys Networks Network Card - Manual (Page 142)

130
RiverMaster Administrator’s Guide
Creating a New Group Chapter 6
Managing Users & Groups
9 Click the Password tab and set the group’s password policies as
described in Table 6 and shown in Figure 69.
Table 5 Dial Policies
Policy Explanation
Allow ISP Selection When enabled, Aurorean users can decide whether or not
to disable an ISP so that it is not used for dialing. When an
ISP is disabled, its associated POP phone numbers do not
appear in the dial list. This policy is enabled by default.
Allow POP Ordering When enabled, Aurorean users can change the dialing
sequence for POPs to match their personal preferences.
This policy provides the flexibility of mixing POPs of different
ISPs as well as moving 800 number POPs ahead of local
POP phone numbers. This policy is disabled by default.
Allow Dial String Editing When enabled, Aurorean users can edit the digit string
dialed by their modem, to include any special prefix
numbers or other digits required by the telephone
equipment at that site. This policy is disabled by default.
Allow Manual Dialing When enabled, Aurorean users can choose to manually dial
a POP phone number using a telephone. With manual
dialing, the user’s modem does not send any digits; the user
must lift the receiver of a telephone and dial the POP
number using the telephone’s keypad. This policy is
disabled by default.
Allow 800 Number Dialing When enabled, Aurorean users can dial a nationwide POP
phone number (800, 888, or 877 number) instead of a local
phone number. Because ISPs often charge a premium for
this type of access, your may want to restrict users from
dialing these numbers. This policy is disabled by default.