Enterasys Networks Network Card - Manual (Page 170)

158
RiverMaster Administrator’s Guide
Monitoring System Activity Chapter 7
Viewing Server Activity & Statistics
To view message activity, perform the following steps:
1 Open the View System Activity pullout.
A sample message activity view is shown in Figure 85.
Figure 85 Message Activity WIndow
2 Select the types of messages you want to view by choosing one of
the following:
– All Messages to view messages of all types generated by the APS
and ANG, and Aurorean Client.
– Login/Logout Activity to limit the display to accounting/billing
and authorization messages produced when remote clients log in
and out.
– Trace to examine activity trace messages that contain details on
tunnel protocol negotiation and remote client session reports sent
in by Aurorean software.
– Alarms/Alerts/Notifications to check for alarm, alert, and
problem notification messages that indicate problems at the
Aurorean Network Gateway or Aurorean Policy Server or a
remote client.
Select which messages to display here
Click here to open the advanced Message Viewer to display messages for other days
Use these
controls to
start and
pause the
message
display
Click here to
minimize and
maximize the
detailed
message
description
display
Click here to
open the
View System
Activity
pullout