Enterasys Networks Network Card - Manual (Page 245)

RiverMaster Administrator’s Guide
233
Appendix B Configuring Routing Protocols
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
.
Figure 132 OSPF Routing Protocol Configuration
2 Type the IP address for the Trusted interface in the OSPF Router ID
fields.
3 From the OSPF Authentication Algorithm menu, choose the
authentication algorithm used by routers on your network.
If the routers on your network do not require passwords to accept
OSPF updates, set the algorithm to None and continue with the next
step.
4 Do one of the following:
– Click Apply to save your changes, click Cancel to close the
window, and click Next to continue configuration. The Interfaces
tab of the Routing Configuration window appears.
– Click Cancel to close the window without saving your changes.
– Click Reset to the return the OSPF properties to their default
settings.