Installing rivermaster software, System requirements, Hardware requirements – Enterasys Networks Network Card User Manual

Page 13: Chapter 1 – installing rivermaster software, Installing rivermaster

Advertising
background image

RiverMaster Administrator’s Guide

1

1

Installing RiverMaster

Installing RiverMaster

Installing RiverMaster

Installing RiverMaster

Software

Software

Software

Software

This chapter provides the system requirements and step-by-step instructions
for installing RiverMaster software on your computer. If you have not already
done so, Enterasys Networks recommends that you mount and connect your
Aurorean Policy Server and Aurorean Network Gateway before performing
these steps. Refer to the Aurorean Installation & Service Guide supplied with
each server for detailed installation instructions.

System Requirements

To run the RiverMaster application, your computer must meet the following
requirements.

Hardware Requirements

RiverMaster runs on a desktop or laptop computer equipped with:

H A 233 MHz processor or faster
H 64 MB RAM minimum, 128 MB recommended
H 80 MB free space on the computer’s hard drive
H CD ROM drive
H Ethernet network interface

NOTE

To best view the RiverMaster user interface, set your monitor to display

65536 colors or better at 1024 x 768 resolution.

Advertising