8 do one of the following, Radius authorization, 1 open the configuration pullout – Enterasys Networks Network Card User Manual
Page 95
RiverMaster Administrator’s Guide
83
Chapter 4
Adding an Authorization Plug-In
Setting Up Aurorean Services
6
Optionally, specify a value in the Num Threads field.
This function allows the specified number of users to simultaneously
log in without delay. The range of threads that can be set is 1 to 100,
with a default value set to 10.
7
If you want to make this plug-in the default authorization method,
check the Default Plug-In box.
8
Do one of the following:
–
Click Update to save your changes.
–
Click Cancel to clear the fields without saving the plug-in.
RADIUS Authorization
To configure the APS to forward authentication requests to a RADIUS server,
perform the following steps:
1
Open the Configuration pullout.
2
Choose Authorization Plug-ins from the Configure pull-down box in
the top left corner of the pullout. Or, in the list of Aurorean Virtual
Network devices, expand the tree list under the name of your APS (by
clicking the + symbol), expand it again under Auth Service and click
Make New Plug-in...
The Create New Plug-in window will appear as shown in Figure 46,
but without default or configured values.