Enterasys Networks Network Card - Manual (Page 110)

98
RiverMaster Administrator’s Guide
Backing Up the Database Chapter 4
Setting Up Aurorean Services
5 Click the arrow in the Trace Level field and select None, Low, Medium
or High.
Medium and High trace levels are recommended only for diagnostic
purposes and with the supervision of Enterasys Customer Support
personnel.
6 Click Set to enable the Trace Level.
RiverMaster now begins tracing messages at the level you set.
NOTE
If you want to terminate a particular running service, click Stop. To
start up a terminated service, click Start.
Backing Up the Database
The Management database ( management.db ) is a 1Mb file residing on the
APS which contains a list of selected ISPs as well as configuration data for
both the tunnel and management servers. To avoid the possibility of down
time should the database become corrupted, it is advisable to back it up.
Consult Enterasys Customer Support for directions to reinstall the database.
Two options are available for saving the database. You can simply copy the
file into a default directory on the APS or copy it a second time into a
directory of your choice on your management device, a remote network site
or to a ZIP device.
To back up the Management database on the APS, perform the following
steps:
1 Open the Configuration pullout.
2 Click on the Activity icon in the lower left corner of the pullout to
switch to the Active Tunnel/Service List view.
3 Expand the tree list under Active Service List (click the + symbol).