Enterasys Networks Network Card - Manual (Page 92)

80
RiverMaster Administrator’s Guide
Adding an Authorization Plug-In Chapter 4
Setting Up Aurorean Services
For example, a low trace level set for the Tunnel Management Service will
produce messages similar to those in Figure 43.
Figure 43 Trace Messages Display
If you read the text for each Tunnel Trace message above, you can follow the
chain of protocol messages which signify the communications that occur on a
packet level when a client successfully makes a connection. Then, if a client
connection subsequently fails, you could compare messages and troubleshoot
the problem. For instructions on setting trace levels, refer to “Setting Trace
Levels” on page 97.
Adding an Authorization Plug-In
The Enterasys Authentication plug-in is factory-installed by Enterasys
Networks and made the default plug-in. This plug-in is used when you log
into the RiverMaster application to ensure that you have administration
privileges. To support SecurID and RADIUS authentication, you must add
one or more SecurID or RADIUS plug-ins.
Note Tunnel Trace
messages sent by
the tunnel server
See message text
here
Highlighted message
here is detailed in
description area
below
Click here
for View
System
Activity
pullout