Enterasys Networks Network Card - Manual (Page 259)

RiverMaster Administrator’s Guide
247
Appendix B Loading the Floppy Disk
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
Figure 142 Save Configuration Window
10 Select a directory, either on your computer, the A: drive, or another
site on the network and click Save to store the configuration.
NOTE
When saving configuration information, you cannot change its default
name config.irx . You may choose a different drive or directory but not
a file name. Although you can enter a different file name and receive a
message indicating RiverMaster successfully wrote the file, it will always
be saved as config.irx .
This concludes floppy disk configuration on RiverMaster. Continue with the
next section.
Loading the Floppy Disk
Configuring the ANG with the floppy disk at the remote location is simple.
Perform the following:
1 Insert the floppy disk in the Floppy Disk drive.
2 Reboot the ANG.