Enterasys Networks Network Card - Manual (Page 182)

170
RiverMaster Administrator’s Guide
Monitoring System Activity Chapter 7
Viewing Server Activity & Statistics
RiverMaster Options
The RiverMaster Options button performs the following functions:
H Controls the number of messages and the frequency they are shown
in the Message Viewer. Messages are displayed in the Tunnel
Statistics window every 5 seconds (default) and are rolled over after
reaching the default maximum of 2000 messages. All four ListView
sizes are defaulted at 500 messages.
H When the window is enlarged, it displays RiverMaster session and
message data. The start and duration of the current session is
displayed at the bottom of the window. Message Statistics are also
displayed but only for informational purposes to be interpreted with
the help of Enterasys Customer Support personnel.
To use RiverMaster Options, perform the following steps:
1 At the RiverMaster main interface, click the RiverMaster Options
button above the service status screen.
The RiverMaster Options window displays as shown in Figure 89.