8 do one of the following – Enterasys Networks Network Card User Manual
Page 106
94
RiverMaster Administrator’s Guide
Using the Notification Service to Send E-Mail
Chapter 4
Setting Up Aurorean Services
3
Click Add (the Add button to the right of Mailing Lists).
4
In the Name field, type a descriptive name for this mailing list.
5
In the From Address field, enter the E-mail address that will appear
as the originator for E-mails sent to members of this list.
Instead of using your E-mail address or the address of another
person, you can create a new address for the APS, such as
[email protected]
.
6
In the SMTP Server field, enter the name of the SMTP server on your
network.
Simple Mail Transfer Protocol (SMTP) servers typically follow the
naming convention SMTP.Company.com where Company is the
company name used throughout your network.
7
To make the new list the default mailing list, place a check next to
Default List.
8
Do one of the following:
–
Click Commit to save the new mailing list.
–
Click Cancel to clear the mailing list information without saving
your changes.
NOTE
When you modify Notification service settings, you must restart the
APS to put the changes into effect.