Enterasys Networks Network Card - Manual (Page 247)

RiverMaster Administrator’s Guide
235
Appendix B Configuring Routing Interfaces
ANG-3000/7000 Preconfiguration Stored on a Floppy Disk
Figure 133 Interfaces Tab in the Routing Configuration Window
2 Select the interface (Trusted or External) from the list under Network
Interfaces.
The protocols already enabled for this interface appear in the Routing
Protocols list.
3 Do one of the following:
– To add a protocol to the trusted interface, click Add and continue
with the next step.
– To remove a protocol, select the protocol from the Routing
Protocols list and click Remove. Skip to Step 5.
4 When the Add an Interface Routing Protocol window appears as
shown in Figure 134, select a routing protocol and click Add.