Enterasys Networks Network Card - Manual (Page 91)

RiverMaster Administrator’s Guide
79
Chapter 4 Before You Begin
Setting Up Aurorean Services
that you select. You must first define a mailing list and then add E-mail
addresses for each recipient to this list. You can select which types of
messages (alarms, alerts, or problem notifications) will be sent to each
address.
For instructions on creating mailing lists for problem notification, refer to
“Using the Notification Service to Send E-Mail” on page 93.
Trace Levels
The number of messages the Management and Tunnel servers report to
RiverMaster can be set on a per service basis. Because so many messages are
routinely shared via control traffic between the servers and clients, if a limit
were not set on their collection and display they could disrupt Aurorean
Virtual Network service. But, having the option to occasionally read these
messages can help troubleshoot service problems. Refer to Chapter 7 for more
detailed information on the types of messages displayed.
RiverMaster permits you to set low, medium or high trace levels for the ten
available Enterasys services. These levels correspond to varying numbers of
messages reported to RiverMaster, depending on the service you configure.