Document Outline

• CHAPTER 1 BASIC FUNCTIONS
  • 1.1 Workspace Management Function
  • 1.2 Project Management Function
  • 1.3 Project Dependence
  • 1.4 Make/Build Function
    • 1.4.1 Customize Build Function
  • 1.5 Include Dependencies Analysis Function
  • 1.6 Functions of Setting Tool Options
  • 1.7 Error Jump Function
  • 1.8 Editor Functions
  • 1.9 Storing External Editors
  • 1.10 Storing External Tools
  • 1.11 Macro Descriptions Usable in Manager
  • 1.12 Setting Operating Environment
  • 1.13 Debugger Types
  • 1.14 Memory Operation Functions
  • 1.15 Register Operations
  • 1.16 Line Assembly and Disassembly
  • 1.17 Symbolic Debugging
    • 1.17.1 Referring to Local Symbols
    • 1.17.2 Referring to Variable of C Language
• CHAPTER 2 DEPENDENCE FUNCTIONS
  • 2.1 Simulator Debugger
    • 2.1.1 Setting Operating Environment
      • 2.1.1.1 Boot ROM File Automatic Execution
    • 2.1.2 Instruction Simulation
    • 2.1.3 Memory Simulation
    • 2.1.4 I/O Port Simulation
    • 2.1.5 Interrupt Simulation
    • 2.1.6 Reset Simulation
    • 2.1.7 Low-Power Consumption Mode Simulation
    • 2.1.8 STUB Function
    • 2.1.9 Break
      • 2.1.9.1 Code Break
      • 2.1.9.2 Data Break
      • 2.1.9.3 Trace-Buffer-Full Break
      • 2.1.9.4 Guarded Access Break
      • 2.1.9.5 Forced Break
    • 2.1.10 Measuring Execution Cycle Count
    • 2.1.11 Trace
      • 2.1.11.1 Setting Trace
      • 2.1.11.2 Displaying Trace Data
      • 2.1.11.3 Searching Trace Data
      • 2.1.11.4 Saving Trace Data
    • 2.1.12 Measuring Coverage
      • 2.1.12.1 Coverage Measurement Procedures
    • 2.1.13 Checking Debugger Information
  • 2.2 Emulator Debugger (MB2141)
    • 2.2.1 Setting Operating Environment
      • 2.2.1.1 MCU Operation Mode
      • 2.2.1.2 Debug Area
      • 2.2.1.3 Memory Area Types
      • 2.2.1.4 Memory Mapping
      • 2.2.1.5 Timer Minimum Measurement Unit
    • 2.2.2 Notes on Commands for Executing Program
    • 2.2.3 Commands Available during Execution of User Program
    • 2.2.4 On-the-fly Memory Access
    • 2.2.5 Break
      • 2.2.5.1 Code Break
      • 2.2.5.2 Data Break
      • 2.2.5.3 Sequential Break
      • 2.2.5.4 Guarded Access Break
      • 2.2.5.5 Trace-Buffer-Full Break
      • 2.2.5.6 Performance-Buffer-Full Break
      • 2.2.5.7 Forced Break
    • 2.2.6 Events
      • 2.2.6.1 Operation in Normal Mode
      • 2.2.6.2 Operation in Multi Trace Mode
      • 2.2.6.3 Operation in Performance Mode
    • 2.2.7 Control by Sequencer
      • 2.2.7.1 Setting Sequencer
      • 2.2.7.2 Break by Sequencer
      • 2.2.7.3 Trace Sampling Control by Sequencer
      • 2.2.7.4 Time Measurement by Sequencer
      • 2.2.7.5 Sample Flow of Time Measurement by Sequencer
    • 2.2.8 Real-time Trace
      • 2.2.8.1 Single Trace
      • 2.2.8.2 Setting Single Trace
      • 2.2.8.3 Multi trace
      • 2.2.8.4 Setting Multi Trace
      • 2.2.8.5 Displaying Trace Data Storage Status
      • 2.2.8.6 Specify Displaying Trace Data Start
      • 2.2.8.7 Display Format of Trace Data
      • 2.2.8.8 Reading Trace Data On-the-fly
      • 2.2.8.9 Saving Trace Data
    • 2.2.9 Measuring Performance
      • 2.2.9.1 Performance Measurement Procedures
      • 2.2.9.2 Display Performance Measurement Data
    • 2.2.10 Measuring Coverage
      • 2.2.10.1 Coverage Measurement Procedures
    • 2.2.11 Execution Time Measurement
    • 2.2.12 Sampling by External Probe
    • 2.2.13 Checking Debugger Information
  • 2.3 Emulator Debugger (MB2147-01)
    • 2.3.1 Setting Operating Environment
      • 2.3.1.1 Monitoring Program Automatic Loading
      • 2.3.1.2 MCU Operation Mode
      • 2.3.1.3 Debug Area
      • 2.3.1.4 Memory Area Types
      • 2.3.1.5 Memory Mapping
      • 2.3.1.6 Debug Function
      • 2.3.1.7 Event Mode
    • 2.3.2 Notes on Commands for Executing Program
    • 2.3.3 Commands Available during Execution of User Program
    • 2.3.4 Break
      • 2.3.4.1 Code Break
      • 2.3.4.2 Data Break
      • 2.3.4.3 Monitoring Data Break
      • 2.3.4.4 Sequential Break
      • 2.3.4.5 Guarded Access Break
      • 2.3.4.6 Trace-Buffer-Full Break
      • 2.3.4.7 Performance-Buffer-Full Break
      • 2.3.4.8 External Trigger Break
      • 2.3.4.9 Forced Break
    • 2.3.5 Control by Sequencer
      • 2.3.5.1 Setting Sequencer
    • 2.3.6 Real-time Trace
      • 2.3.6.1 Setting Single Trace
      • 2.3.6.2 Multi Trace
      • 2.3.6.3 Setting Methods of Multi Trace
      • 2.3.6.4 Displaying Trace Data Storage Status
      • 2.3.6.5 Specify Displaying Trace Data Storage Status
      • 2.3.6.6 Display Format of Trace Data
      • 2.3.6.7 Reading Trace Data On-the-fly
      • 2.3.6.8 Saving Trace Data
    • 2.3.7 Measuring Performance
      • 2.3.7.1 Performance Measurement Procedures
      • 2.3.7.2 Display Performance Measurement Data
    • 2.3.8 Measuring Coverage
      • 2.3.8.1 Coverage Measurement Procedures
    • 2.3.9 Real-time Monitoring
    • 2.3.10 Execution Time Measurement
    • 2.3.11 Power-on Debugging
    • 2.3.12 RAM Checker
    • 2.3.13 Checking Debugger Information
  • 2.4 Emulator Debugger (MB2147-05)
    • 2.4.1 Setting Operating Environment
      • 2.4.1.1 Monitoring Program Automatic Loading
      • 2.4.1.2 MCU Operation Mode
      • 2.4.1.3 Debug Area
      • 2.4.1.4 Memory Area Types
      • 2.4.1.5 Memory Mapping
    • 2.4.2 Notes on Commands for Executing Program
    • 2.4.3 Commands Available during Execution of User Program
    • 2.4.4 Break
      • 2.4.4.1 Code Break
      • 2.4.4.2 Data Break
      • 2.4.4.3 Guarded Access Break
      • 2.4.4.4 Trace-Buffer-Full Break
      • 2.4.4.5 Forced Break
    • 2.4.5 Real-time Trace
      • 2.4.5.1 Setting Trace
      • 2.4.5.2 Displaying Trace Data Storage Status
      • 2.4.5.3 Specifying Displaying Trace Data Start
      • 2.4.5.4 Display Format of Trace Data
      • 2.4.5.5 Reading Trace Data On-the-fly
      • 2.4.5.6 Saving Trace Data
    • 2.4.6 Measuring Execution Cycle Count
  • 2.5 Emulator Debugger (MB2198)
    • 2.5.1 Setting Operating Environment
      • 2.5.1.1 Monitoring Program Automatic Loading
      • 2.5.1.2 Boot ROM File Automatic Execution
      • 2.5.1.3 MCU Operation Mode
      • 2.5.1.4 Operation Frequency Control
    • 2.5.2 Notes on Commands for Executing Program
    • 2.5.3 Commands Available during Execution of User Program
    • 2.5.4 Break
      • 2.5.4.1 Code Break
      • 2.5.4.2 Data Break
      • 2.5.4.3 Guarded Access Break
      • 2.5.4.4 Sequential Break
      • 2.5.4.5 Trace-Buffer-Full Break
      • 2.5.4.6 Performance-Buffer-Full Break
      • 2.5.4.7 External Trigger Break
      • 2.5.4.8 Forced Break
    • 2.5.5 Control by Sequencer
      • 2.5.5.1 Operating of sequencer
    • 2.5.6 Real-time Trace
      • 2.5.6.1 Setting Trace
      • 2.5.6.2 Displaying Trace Data Storage Status
      • 2.5.6.3 Specifying Displaying Trace Data Start
      • 2.5.6.4 Display Format of Trace Data
      • 2.5.6.5 Saving Trace Data
    • 2.5.7 Measuring Performance
      • 2.5.7.1 Performance Measurement Procedures
      • 2.5.7.2 Display Performance Measurement Data
    • 2.5.8 Execution Time Measurement
    • 2.5.9 Power-On Debugging
  • 2.6 Emulator Debugger (MB2100-01)
    • 2.6.1 Starting debugging
      • 2.6.1.1 Operating Environments of the Target
      • 2.6.1.2 Security
    • 2.6.2 Ending debugging
    • 2.6.3 Efficiently Executing Debugging
      • 2.6.3.1 Increasing Communication Speed during Debugging
      • 2.6.3.2 Switching Debug Function
    • 2.6.4 Executing Program
      • 2.6.4.1 Setting/Release of Debug Functions
      • 2.6.4.2 Monitoring
      • 2.6.4.3 Power-on Debug
      • 2.6.4.4 Notes on Commands for Executing Program
    • 2.6.5 To Access the Flash Memory
    • 2.6.6 To Interrupt the Program Execution [Break]
      • 2.6.6.1 Code Break (Hardware)
      • 2.6.6.2 Code Break (Software)
      • 2.6.6.3 Data Break
      • 2.6.6.4 Forced Break
      • 2.6.6.5 Data Watch Break
      • 2.6.6.6 Sequencer
    • 2.6.7 Measuring the Program Execution Cycle Count
    • 2.6.8 Measuring Event-to-Event Execution Cycle Count [Performance Measurement]
      • 2.6.8.1 Measuring Performance
    • 2.6.9 Viewing Program Execution History [Trace]
      • 2.6.9.1 Displaying Trace Data
      • 2.6.9.2 Trace Data Display Examples (RAW Data)
      • 2.6.9.3 Trace Data Display Example (Instruction)
      • 2.6.9.4 Trace Data Display Example (Source)
      • 2.6.9.5 Saving Trace Data
      • 2.6.9.6 Searching for Trace Data
    • 2.6.10 How to Display the Output Message from User Program to the Debugger
    • 2.6.11 Checking Debugger Information
  • 2.7 Monitor Debugger
    • 2.7.1 Resources Used by Monitor Program
    • 2.7.2 Break
      • 2.7.2.1 Software Break
      • 2.7.2.2 Forced Break