Genicom microLaser 210 - Manual (Page 13)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 3
About this Manual
Chapter 7: Using the 550-Sheet Feeder
This chapter provides all of the information necessary to install, use, and maintain the 550-sheet
paper feeder option, including procedures for cleaning the feeder and removing paper jams.
Chapter 8: Using the Envelope Feeder
This chapter provides all of the information necessary to install, use, and maintain the envelope
feeder, including procedures for removing paper jams.
Chapter 9: Using the Offset Catch Tray
This chapter provides all of the information necessary to install, use, and maintain the offset output
tray, including procedures for cleaning and removing paper jams.
Chapter 10: Using the Face Up Tray
This chapter provides all of the information necessary to install, use, and maintain the face up out-
put tray.
Appendix A: GENICOM Customer Support and Part Numbers
This appendix directs you to sources of help and information, and also lists the part numbers for
GENICOM microLaser 210 printers, options, and consumables.
Appendix B: Safety Notes and Regulatory Compliances]
This appendix describes cautions to take when installing, transporting, or operating the printer, and
also includes the applicable regulatory compliances.
Printer Orientation
Throughout this guide, the four sides of the printer are referred to as front, rear, right, and left. The
front of the printer is the side near the control panel, and the rear of the printer is opposite the
front. The left and right sides of the printer are defined as the sides to the left and right, respectively,
of a person who is facing the front of the printer.
Conventions
This following conventions are used throughout this manual to emphasize certain procedures or
information:
NOTE: A note is a tip or extra information that may be helpful in installing or using the printer.
CAUTION: A caution message provides information that may help you avoid equipment
damage, process failure, or inconvenience. Read all caution messages carefully. GENICOM
will not be responsible for damage that results from improper use of the printer.
WARNING! A warning message indicates the possibility of personal injury if a specific proce-
dure is not performed exactly as described in the guide. Pay close attention to these sec-
tions and read them fully to prevent possible injury. GENICOM will not be responsible for
damage that results from improper use of the printer.