Genicom microLaser 210 - Manual (Page 97)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 5-13
Paper Jams
9. Close the rear cover.
Clearing an E7 Paper Jam
When an E7 error message is shown on the display screen, there is a paper jam in the duplexer. Use
the following procedure to clear a duplex paper jam:
1. If you are using the paper tray in its extended position, remove the paper tray from the
printer.
2. Squeeze the tabs on the rear of the printer and pull the rear cover toward you to open it.