Genicom microLaser 210 User Manual
Page 136
Advertising
Publication No. GEG-99054
Genicom
Mar 00
7-8
microLaser 210 User Guide
Installing the 550 Sheet Paper Feeders
5.
Turn the printer off by pressing [ O ] on the power switch on the left front of the printer.
6.
Disconnect the power cord from the AC outlet and from the printer.
NOTE:
Installing the paper feeder while the printer is on may damage the printer or the paper feeder.
7.
Close the multi bypass feeder, and remove any printed sheets from the output paper tray.
Advertising