Genicom microLaser 210 - Manual (Page 39)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 2-13
Loading the Universal Paper Tray
4. Squeeze the right width guide, lift it up, and slide the guides to the sides of the tray.
5. Verify that the plate has dropped down into the base of the paper tray. If the tray is locked in
the up potision, pull the lever near the front of the tray to release the plate, or push the paper
tray all the way into the printer and then remove it.
CAUTION: Do not overload the tray, and make sure the paper stack is beneath the retaining
clips on both sides of the tray. Fan paper before placing it in the tray, and place paper in
the tray with the print side up.