Genicom microLaser 210 - Manual (Page 80)

Publication No. GEG-99054 Genicom Mar 00
4-18 microLaser 210 User Guide
Cleaning the Printer
1. Turn the printer off by pressing the [ O ] on the power switch on the right side of the printer,
and disconnect the AC power cord from the wall outlet.
2. Using a soft cloth that is slightly damp with cold water, wipe the printer covers and tray faces.
Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.
3. Use a soft, dry cloth to thoroughly dry the covers and tray faces.
Do not use solvents or abrasive cleaners to clean printer covers. Use only cold water and a
very mild soap.