Genicom microLaser 210 - Manual (Page 60)

Publication No. GEG-99054 Genicom Mar 00
3-16 microLaser 210 User Guide
Functions Menu
Functions Menu
The Functions Menu provides access to several printer functions that can supply you with informa-
tion about the printer and its settings. Use the following procedure to enter the Functions Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Functions Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the system menu.
4. Press the NEXT button to move through the available functions: Reset Printer, Print Sum-
mary, Print test, and Print Fonts.
5. Use the procedures in the following table to execute the functions:
Functions Procedure for Executing Function
Reset Printer
This function resets the printer. Press SELECT to reset the printer.
Print Summary
This function prints a list of all printer
settings: Press SELECT to print a summary of the printer
settings.
Print Test
This function allows you to print a single test
page or a continuous test page. 1. Press NEXT or PREVIOUS to toggle between
SINGLE PAGE and CONTINUOUS.
2. Press SELECT to print the test page(s).
Print Fonts
This function allows you to print Postscript
or PCL font lists. 1. Press NEXT or PREVIOUS to toggle between
POSTSCRIPT and PCL.
2. Press SELECT to select and print the specific fonts
list.