Genicom microLaser 210 - Manual (Page 137)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 7-9
Installing the 550 Sheet Paper Feeders
8. Remove the main paper tray from the printer.
9. Lift the printer and lower it onto the two stacked paper feeders, aligning the pegs on the
upper paper feeder with the holes on the bottom of the printer.
NOTE: Be sure to lower the printer gently. Components inside the printer may be damaged by lowering
it quickly.
10. Insert the three thumbscrews supplied with the paper feeder into the holes on the base of the
printer.