Clearing an e4 jam, Clearing an e4 jam 5-10 – Genicom microLaser 210 User Manual
Page 94
Advertising
Publication No. GEG-99054
Genicom
Mar 00
5-10
microLaser 210 User Guide
Paper Jams
6.
Insert the pegs on the sides of the toner cartridge into the channels on the inside of the
printer, and push the cartridge into the printer.
7.
Close the front cover, pressing on the center of the front cover until it closes securely.
Clearing an E4 Jam
If an E4 error code precedes the error message on the first line of the control panel display, paper
has jammed somewhere near the paper exit slot. Use the following procedure to clear a paper jam in
this location:
1.
If you are using the paper tray in its extended position, remove it from the printer.
Advertising