Genicom microLaser 210 User Manual
Page 38
Advertising
Publication No. GEG-99054
Genicom
Mar 00
2-12
microLaser 210 User Guide
Loading the Universal Paper Tray
Use the following procedure to load paper into the 550 sheet universal paper tray:
1.
Place the paper tray on a level surface.
2.
Squeeze the length guide, lift it up, and slide it to the rear of the tray.
3.
If the paper you are using is longer than A4 (297 cm), press the square green button on the
bottom of the paper tray to release the rear of the tray, and pull the tray out to extend it.
Advertising