Genicom microLaser 210 User Manual
Page 96
Advertising
Publication No. GEG-99054
Genicom
Mar 00
5-12
microLaser 210 User Guide
Paper Jams
5.
If there is paper jammed around the fuser unit, lift up the fuser unit release levers on the left
and right sides of the fuser and remove the jammed paper.
6.
Return the fuser release levers to their original position.
7.
If you removed the duplexer, insert the duplexer into the printer.
8.
Push the green tabs at the sides of the duplexer out toward the sides of the printer.
Advertising