Genicom microLaser 210 - Manual (Page 164)

Publication No. GEG-99054 Genicom Mar 00
8-6 microLaser 210 User Guide
Loading the Envelope Feeder
Loading the Envelope Feeder
Use the following procedure to load envelopes into the envelope feeder:
1. If you are planning to use large size envelopes, pull out the extension at the end of the paper
tray.
2. Lift up the paper holder, align the four corners of the stack of envelopes or postcards, and
gently insert them into the envelope feeder until they reach the back of the feeder.
NOTE: Do not use envelopes or postcards that are creased or wrinkled. Do not load more envelopes or
postcards than the specified amount. If the stack of envelopes or postcards is bent, it may
cause a paper jam; avoid bending envelopes when you are loading them into the envelope
feeder.
Postcard 100
Custom Size 3.87 x 5.85 inches (98.4 x 148.5mm)
to
7 x 10 inches (178 x 254mm) Maximum stack height 0.95
inches (24mm)