About this chapter, Safety precautions, Handling the printer – Genicom microLaser 210 User Manual
Page 18: Package contents, Safety precautions 1-2, Handling the printer 1-2, Package contents 1-2
Publication No. GEG-99054
Genicom
Mar 00
1-2
microLaser 210 User Guide
Safety Precautions
About this Chapter
This chapter reviews the contents of the printer packaging, explains the parts of the printer, and
describes the space and environment requirements of the printer.
Safety Precautions
This printer is available in either of the following power specifications: 110V and 220V. The speci-
fications that apply to your printer depend on your machine configuration. To prevent fire or shock
hazards, connect the power plug only to a properly rated power outlet.
Handling the Printer
Follow the guidelines below when lifting or moving the printer:
■
The printer is very heavy, and should always be lifted by two people. The weight of the
printer without paper tray, toner cartridge, and paper is about 51 lbs (23 kg). Never attempt
to lift the printer alone.
■
To lift the printer, have two individuals facing each other from the front and the rear of the
printer grasp the recessed areas on each side of the printer. Do not lift the printer by grasping
any area other than these recessed areas.
■
When lifting the printer, maintain proper lifting posture to prevent injuries.
Package Contents
Make sure that all of the items shown below are included in the printer packaging. If any items are
missing or damaged, contact your dealer.