Genicom microLaser 210 - Manual (Page 171)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 8-13
Maintaining the Envelope Feeder
Maintaining the Envelope Feeder
The envelope feeder requires very little maintenance; however, with normal use you will need to
perform some routine maintenance tasks such as cleaning the envelope feeder.
Cleaning the Exterior of the Envelope Feeder
Through normal use the exterior of the envelope feeder may become dirty or stained with toner.
Although exterior dirt should not affect printer performance, an occasional exterior cleaning may
be necessary to maintain the appearance of the envelope feeder.
1. Turn the printer off by pressing [ O ] on the power switch on the right side of the printer.
2. Remove the plug of the AC power cord from the AC wall outlet.
3. Using a soft cloth, slightly damp with cold water, wipe the envelope feeder covers and tray
faces. Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.
4. Using a soft, dry cloth, thoroughly dry the covers and tray faces.
5. Insert the plug of the AC power cord into the AC wall outlet, and turn the printer on by
pressing [ I ] on the power switch on the right side of the printer.
CAUTION: Do not use solvents or abrasive cleaners to clean envelope feeder covers. Use
only cold water and a very mild soap to clean covers.