Genicom microLaser 210 - Manual (Page 28)

Publication No. GEG-99054 Genicom Mar 00
2-2 microLaser 210 User Guide
Connecting the Printer to the AC Outlet
About this Chapter
This chapter provides information concerning the daily use of the printer, including procedures for
connecting the printer and loading print media, and guidelines for selecting print media.
Connecting the Printer to the AC Outlet
Use the following procedure to connect the power cord and turn the printer on:
1. Insert the power cord into the AC connector on the rear of the printer.
2. Verify that the power switch of the printer is in the [O] (off) position, then insert the plug of
the power cord into the AC outlet.