Genicom microLaser 210 User Manual

Page 177

Advertising
background image

Mar 00

Genicom

Publication No. GEG-99054

microLaser 210 User Guide

9-5

Installing the Offset Catch Tray

4.

Push up on the top cover tabs to release the top cover, and lift it off of the printer.

5.

Lower the offset catch tray onto the printer while inserting the stub at the front of the offset
catch tray into the hole on the top of the printer.

6.

Insert the tabs on the back of the offset catch tray into the holes on the back of the printer,
and push down until you hear the tabs cllick in place.

Advertising