Genicom microLaser 210 - Manual (Page 135)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 7-7
Installing the 550 Sheet Paper Feeders
2. Place one paper feeder on a sturdy, level surface.
NOTE: Do not move the printer when the paper feeder is installed.
3. Align the three holes on the bottom of the upper feeder with the three stubs on the lower
feeder, and place the upper paper feeder on top of the lower paper feeder.
4. Insert the three thumbscrews supplied with the paper feeder into the two holes on the base of
the upper paper feeder and turn them until tight.