Genicom microLaser 210 User Manual
Page 42
Publication No. GEG-99054
Genicom
Mar 00
2-16
microLaser 210 User Guide
Loading the Front Tray
■
Do not mix print media in the front tray; for example, do not load a stack that includes both
envelopes and standard paper. Load only one type of print media.
■
Do not mix print media sizes in the front tray; for example, do not load a stack that includes
two or more different sizes of paper.
■
Do not load print media that is obviously damaged, wet, creased, or wrinkled.
■
Do not overfill the front tray.
Use the following procedure to load paper in the front tray:
1.
Open the front tray by pulling the hand grip on the top of the front tray cover.
2.
If you are using paper that is letter size or larger, pull out the input tray extension.
3.
Slide the paper guides so they match the size of the paper that you are loading.