Genicom microLaser 210 User Manual

Page 170

Advertising
background image

Publication No. GEG-99054

Genicom

Mar 00

8-12

microLaser 210 User Guide
Solving Envelope Feeder Problems

The following procedure guides you through multiple actions that may solve this envelope feeder
problem. Proceed one step at a time until the problem is solved—you may not need to complete
the entire procedure. If one of the steps in this procedure corrects the problem but the identical
problem returns in less than 50 prints, call for service.

1.

Remove the paper trays and inspect the inside of the envelope feeder for jammed paper or
obviously broken components.

Broken components or scraps of paper lodged inside the envelope feeder may be brushing
against moving parts and causing the noise.

2.

Call your service technician.

This problem may be caused by a malfunctioning or broken component that requires service.

Advertising