About this chapter, About the face up tray, Major components of the face up tray – Genicom microLaser 210 User Manual
Page 192: About the face up tray 10-2, Major components of the face up tray 10-2
Advertising
Publication No. GEG-99054
Genicom
Mar 00
10-2
microLaser 210 User Guide
About the Face Up Tray
About this Chapter
This chapter provides all of the information necessary to install and remove the Face Up Tray.
About the Face Up Tray
The face up tray is an optional output tray that attaches to the top rear of the printer and can hold
up to 100 printed sheets.
The face up tray can be installed with only the printer, or it may be installed with other paper-han-
dling options.
Figure 10-3: Face Up Tray installed with the printer.
Major Components of the Face Up Tray
The following illustration shows the face up tray:.
Figure 10-1: Face Up Tray.
Face Up Tray
Advertising