Genicom microLaser 210 - Manual (Page 92)

Publication No. GEG-99054 Genicom Mar 00
5-8 microLaser 210 User Guide
Paper Jams
8. Insert each paper tray into the appropriate paper tray well, either on the optional feeder or on
the printer.
9. If the front tray is open, close it. Then pull on the recessed area on the front cover to open it.
10. Return the front cover to its original position, pressing on the center of the cover to close it
securely.
Clearing an E3 Paper Jam
If an E3 error message appears on the printer display, there is a paper jam between the toner car-
tridge and the paper exit slot. Use the following procedure to remove a paper jam from this loca-
tion.
1. Remove any printed sheets from the output tray.