Genicom microLaser 210 - Manual (Page 174)

Publication No. GEG-99054 Genicom Mar 00
9-2 microLaser 210 User Guide
About the Offset Catch Tray
About this Chapter
This chapter provides all of the information necessary to install, use, and maintain the Offset Catch
Tray, including procedures for cleaning and removing paper jams.
About the Offset Catch Tray
The offset catch tray is an optional output tray that attaches to the top rear of the printer and can
hold up to 500 printed sheets, and also sorts printed sheets using an offset. The printer supplies all
of the operating power that is needed by the offset catch tray. Motors and circuit boards internal to
the offset catch tray provide it with drive and operational logic.
The offset catch tray can be installed with only the printer, or it may be installed with other
paper-handling options.
Figure 9-1: Offset Catch Tray installed with other paper handling options.
Offset Catch
Tray