Genicom microLaser 210 - Manual (Page 7)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide vii
Loading Print Media 7-12
Loading the A4/Letter/Legal Paper Tray 7-12
Solving 550 Sheet Feeder Problems 7-16
Interpreting Paper Feeder Error Messages 7-17
Installation Problems 7-17
Clearing an E2 Paper Jam 7-18
Correcting Miscellaneous Paper Feeder Problems 7-19
Maintaining the 550 Sheet Feeder 7-21
Replacing Feed Roll, Nudger Roll, and Retard Roll 7-21
Removing the 550 Sheet Feeder 7-26
Moving the 550 Sheet Feeder 7-29
Moving the Printer and 550 Sheet Feeder a Short Distance 7-29
Moving the Printer and 550 Sheet Feeder a Long Distance 7-29
Chapter 8 Using the Envelope Feeder 8-1
About the Envelope Feeder 8-2
Installing the Envelope Feeder 8-2
Installing the Envelope Feeder 8-2
Testing the Envelope Feeder 8-4
Selecting Print Media 8-4
Paper and Print Media To Avoid 8-5
Correct Paper Storage 8-5
Print Media Weight, Type, and Size 8-5
Loading the Envelope Feeder 8-6
Solving Envelope Feeder Problems 8-7
Envelopes Become Creased when Printing 8-7
Interpreting Envelope Feeder Error Messages 8-10
Correcting Miscellaneous Envelope Feeder Problems 8-10
Maintaining the Envelope Feeder 8-13
Cleaning the Exterior of the Envelope Feeder 8-13
8-13
Chapter 9 Using the Offset Catch Tray 9-1
About the Offset Catch Tray 9-2
Major Components of the Offset Catch Tray 9-3