Genicom microLaser 210 - Manual (Page 34)

Publication No. GEG-99054 Genicom Mar 00
2-8 microLaser 210 User Guide
Selecting Print Media
11. Press the NEXT button until the text “USB Setup” is shown on the second line of the dis-
play.
12. Press the SELECT button to enter the USB setup submenu.
13. Press the NEXT button until the text “Interpreter” is shown on the second line of the display.
14. Press the SELECT button to enter the interpreter submenu.
15. Press the NEXT button until the desired interpreter is shown on the second line of the dis-
play. The available interpreter settings include Auto Switch, PCL, and PostScript 3.
16. Press the SELECT button to select the interpreter that you chose in the previous step. After
you have pressed the SELECT button, the first line of the display should contain the text
“USB Setup”, and the second line should contain the text “Interpreter”.
17. Press the NEXT button until the text “Format” is shown on the second line of the display.
18. Press the SELECT button to enter the format submenu.
19. Press the NEXT button until the desired format is shown on the second line of the display.
The available format settings include Raw, Normal, and Binary.
20. Press the SELECT button to select the format setting that you specified in the previous step.
After you have pressed the SELECT button, the first line of the display should contain the
text “USB Setup”, and the second line should contain the text “Format”.
21. Press the RETURN button twice to return to the main menu.
22. Press the START/STOP button to exit the menu system.
USB Resources
If you would like more information about USB, refer to the www.usb.org website. This organiza-
tion is responsible for the determining the USB standard and has a number of FAQ's available that
should answer most questions.
Selecting Print Media
Your printer can print on a variety of media, including plain paper, labels, transparencies, and enve-
lopes. Always use print media that meet the guidelines for use with this printer. Print media that is
not recommended for use with this printer may cause frequent paper jams or poor print quality.
Paper and Print Media To Avoid
Do not use paper or print media that has any of the following characteristics:
■ Does not meet the paper and media size and weight specifications for this printer
■ Is not labeled for use with xerographic printers or xerographic copiers
■ Cannot withstand temperatures of up to 310°F/155°C
■ Is in a sealed package that is obviously damaged or wet
■ Is excessively wrinkled, curled, torn, or warped
■ Is folded or creased
■ Has either an extremely slick surface or an extremely textured surface
■ Has an exposed adhesive surface
■ Has paper pieces glued or taped to the media