Testing the 550 sheet feeder, Selecting print media, Paper and print media to avoid – Genicom microLaser 210 User Manual

Page 139: Correct paper storage, Testing the 550 sheet feeder 7-11, Selecting print media 7-11

Advertising
background image

Mar 00

Genicom

Publication No. GEG-99054

microLaser 210 User Guide

7-11

Testing the 550 Sheet Feeder

NOTE:

If an error message appears on the control panel display, see the Chapter titled “Error
Messages” in the User Manual.

Testing the 550 Sheet Feeder

After installing the 550 sheet paper feeder, use the following test procedure to verify that the feeder
is operating correctly.

1.

Turn the printer on by pressing the [ I ] on the power switch on the right side of the printer.

2.

Once the printer has warmed up and displays the “Ready” message on the control panel dis-
play, use any software application to print a few sheets from each of the feeder trays.

3.

If the feeder does not feed paper or if the control panel displays an error message, refer
to“Solving 550 Sheet Feeder Problems” on page 16.

Selecting Print Media

Your printer can print on a variety of media, including plain paper, labels, transparencies, and enve-
lopes. Always use print media that meet the guidelines for use with this printer. Print media that is
not recommended for use with this printer may cause frequent paper jams or poor print quality.

Paper and Print Media To Avoid

Do not use paper or print media that has any of the following characteristics:

Does not meet the paper and media size and weight specifications for this printer

Is not labeled for use with xerographioasah(o)-a4 1 Tf0 0 0 scn1.5055 0 TD-0s(a)18.ex-7.3phaaster

i-7.1(t)ze55.5(te)

ma■sp9mr[(Df)8.7(r9(◆p-9.7(a607 T5.5(y7(31)s(a)0F/10.)s(a)Cm3(ter)]TJ/F6 1 Tf6.96 0 0 6.96 133188 379.6799 Tm0 Tc(■)Tj/F8 1 Tf10.92 0 0 10.92 153188 372.679 TD70.0006 T23ts)8.7(r7)-13..5(f)-a3..5(fic)-0 sc■3(Alw)1(e)241.9m)-42(e)-9(55.5-263.(p)ck)-6)-14(sis)hah4 TD-0(r[(b).1(pv)(pec)-7(D)16r)-24-edor6ep55.5-y7(w53.4(Ssc■3(Altm3(ter)]TJ/F6 1 Tf6.96 0 0 6.96 133.48 363.7199 Tm0 Tc(■)Tj/F8 1 Tf10.92 0 0 10.92 153.48 372.679 TD830.0006 T275(a)-5.43.8(ex)20 TDce)[(I)11.2(esiv)20 TDel0 0 (■)-5.46-wTc5055 0.2(r)14(a)-ia)-k16r8(l0 0 (■e-6.3(ad60.78r)71.42(fi)◆11.1(55 0.2(l53.1(r)[(Id60.78r)71.42(fit)75(ao55 0.2()-ia)-)71.42(fi)-7.243ph)w)Alw).8(Prp)9 0 sc[(Id63(ter)]TJ/F6 1 Tf6.96 0 0 6.96 19(ia63363.7199 Tm0 Tc(■)Tj/F8 1 Tf10.92 0 0 10.92 19(ia63372.679 TD040.0006 Tc9[(I)18.78e)-2523p)-9.9t)-253(ad62(pec6)-9(4(s2(o)2.8)-a4 1 0y)-2542f)-6.4TDeas-2523pe)edter

Advertising