Genicom microLaser 210 - Manual (Page 133)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide 7-5
Installing the 550 Sheet Paper Feeders
6. Remove the main paper tray from the printer.
7. Align the holes on the bottom of the printer with the pegs on the paper feeder, and lower the
printer onto the paper feeder.
NOTE: Be sure to lower the printer gently. Components inside the printer may be damaged by lowering
the printer quickly.
8. Insert the three thumbscrews supplied with the paper feeder into the holes on the base of the
printer, and turn them until tight.
9. Load paper into the paper tray.