Genicom microLaser 210 - Manual (Page 8)

Publication No. GEG-99054 Genicom Mar 00
viii microLaser 210 User Guide
Installing the Offset Catch Tray 9-3
Removing the Offset Catch Tray 9-7
Testing the Offset Catch Tray 9-10
Solving Offset Catch Tray Problems 9-10
Interpreting Offset Catch Tray Error Messages 9-11
Installation Problems 9-11
Clearing an Offset Catch Tray Paper Jam 9-12
Correcting Miscellaneous Offset Catch Tray Problems 9-13
Maintaining the Offset Catch Tray 9-16
Cleaning the Exterior of the Offset Catch Tray 9-16
Moving the Offset Catch Tray 9-16
Moving the Offset Catch Tray a Short Distance 9-16
Moving the Offset Catch Tray a Long Distance 9-16
Chapter 10 Using the Face Up Tray 10-1
About the Face Up Tray 10-2
Major Components of the Face Up Tray 10-2
Installing the Face Up Tray 10-3
Removing the Face Up Tray 10-6
Testing the Face Up Tray 10-9
Solving Face Up Tray Problems 10-9
Interpreting Face Up Tray Error Messages 10-10
Installation Problems 10-10
Appendix A GENICOM Customer Support
and Part Numbers A-1
Sources of Support A-2
Your GENICOM Vendor A-2
Your Application Vendor A-2
Internet A-2
GENICOM Technical Support A-2
GENICOM Service A-3
GENICOM Worldwide Offices A-3
GENICOM Part Numbers A-6
Printers A-6
Paper Handling Options A-6
Network Interfaces A-6