Genicom microLaser 210 - Manual (Page 202)

Publication No. GEG-99054 Genicom Mar 00
A-2 microLaser 210 User Guide
Sources of Support
About this Appendix
This appendix explains the available sources of GENICOM Customer Support, and also lists con-
tact information and locations of GENICOM worldwide offices. This appendix also lists the part
numbers for GENICOM microLaser 210 printers, options, and consumables. To order parts, con-
tact your local authorized GENICOM dealer.
Sources of Support
There are several sources of Customer Support available to you, depending upon the type of assis-
tance that you need.
Your GENICOM Vendor
The local vendor that you purchased the printer through may be best equipped to help you with
printer problems. Your vendor has specially trained service technicians available to answer ques-
tions, and also has equipment that is necessary to analyze printer problems.
Your Application Vendor
Printing problems often have more to do with the application you are using than with the printer
itself. Contact the manufacturer of the application in use for assistance in resolving such problems.
Internet
The GENICOM server provides access to technical reports, new product announcements, a trade
show schedule, and other general information about GENICOM.
You can access the GENICOM server via any one of the many world-wide web browsers available
to Internet users. The GENICOM home page is http://www.genicom.com.
GENICOM Technical Support
GENICOM Technical Support is available M-F, 8:00 am-8:00 pm, Eastern Time, (540)
949-1031(US). You can also fax questions to GENICOM Technical Support at (540) 949-1505
(US). Please indicate whether you would like a fax or telephone reply.
If you call for assistance, have the following information ready so our technicians can help you
more quickly—also include this information with any question that you fax to GENICOM Tech-
nical Support:
■ Your phone number, fax number, and shipping address
■ A description of the problem
■ The printer model
■ The type of host computer you are using
■ The type and version of operating system you are using
■ The interface you are using, and, if serial, the protocol
■ The application and version you are using
■ The emulation you are using
■ Your printer firmware version (listed on the status pages)