Installing the 550 sheet paper feeders, Installing one paper feeder, Installing the 550 sheet paper feeders 7-3 – Genicom microLaser 210 User Manual
Page 131: Installing one paper feeder 7-3
Mar 00
Genicom
Publication No. GEG-99054
microLaser 210 User Guide
7-3
Installing the 550 Sheet Paper Feeders
Installing the 550 Sheet Paper Feeders
Before installing the paper feeder(s), verify that you have received the following items in the paper
feeder shipping box:
Installing One Paper Feeder
Use the following procedure to install one paper feeder:
1.
Remove the 550 sheet paper feeder from its packaging and remove any cardboard inserts and
packing tape. Locate and set aside the small plastic bag containing three thumbscrews.
2.
Place the paper feeder on a sturdy, level surface.
NOTE:
Do not move the printer once the paper feeder is installed.
;;
;
1
6
10
11
12
13
7
8
9
2
3
4
5
;
;
;
;
;
;
;
;
;
;
;
;
;
;
1
2
3
;
;
;
;
;
;
;
;
;
;
;
;
;
;
2
3
4
1
GEG-99042
550 Sheet Paper Feeder
Installation Sheet
Universal Paper Tray
3 Thumbscrews
WARNING: Before installing any options, turn the printer off by pressing [ O ] on the power
switch on the right side of the unit and disconnect the power cord from the AC outlet.
These precautions are necessary to avoid the risk of electric shock.