Philips HR7755 - Manual (Page 10)

ENGLISH 10
C
5 Fill the feed tube evenly for the best
results.
B When you have to slice or shred large amounts of
food, process only small batches at a time and
empty the bowl regularly between the batches.
C
6 Set the speed control to maximum speed
(position 2).
The process continues until the speed control is
set to position 0 (off).
◗ Set the speed control to position 1 to
decrease the speed.
C
7 Press the pusher lightly onto the
ingredients in the feed tube.
◗ If you are shredding soft vegetables or fruits,
you can decrease the speed by setting the
speed control to position 1 to prevent the
shredded vegetables and fruits from turning
into puree.
C
8 To remove the insert from the insert
holder, take the insert holder in your
hands with its back pointing towards you.
Push the edges of the insert with your
thumbs to make the insert fall out of the
holder.
Kneading accessory
The kneading accessory can be used for kneading
bread dough and for mixing batters and cake
mixtures.
C
1 Put the bowl on the motor unit and place
the kneading accessory onto the tool
holder that stands in the bowl.
2 Put the ingredients in the bowl and fasten
the lid onto the bowl. Place the pusher in
the feed tube to prevent ingredients from
escaping through the feed tube during the
kneading process.
C
3 Set the speed control to maximum speed
(position 2).
See the table for the appropriate processing
times.
Emulsifying disc
You can use the emulsifying disc to prepare
mayonnaise, to whip cream and to whisk egg
whites.
C
1 Put the emulsifying disc onto the tool
holder that stands in the bowl.
2 Put the ingredients in the bowl and put the
lid on the bowl.