Philips HR7755 - Manual (Page 9)

ENGLISH 9
C
1 Remove the protective cover from the
blade.
C
2 Put the tool holder in the bowl and place
the blade on the tool holder that stands in
the bowl.
3 Put the ingredients in the bowl.
B Pre-cut large pieces of food into pieces of approx.
3 x 3 x 3 cm. Put the lid on the bowl.
4 Put the pusher in the feed tube.
C
5 Set the speed control to maximum speed
(position 2).
- The process continues until the speed control
is set to position 0 (off).
◗ Set the speed control to position 1 to
decrease the speed.
Tips
◗ When you chop onions, use the pulse setting
several times to prevent the onions from
becoming too finely chopped.
◗ Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will become too hot, will start to melt and
will turn lumpy.
◗ Do not use the blade to chop very hard
ingredients like coffee beans, nutmeg, turmeric
and ice cubes, as this may cause the blade to
get blunt.
If food sticks to the blade or to the inside of the
bowl:
1 Turn the appliance off.
2 Remove the lid from the bowl.
3 Remove the ingredients from the blade or
from the wall of the bowl with a spatula.
Inserts: slicing and shredding insert
Never process hard ingredients like ice cubes
with the inserts.
The cutting edges of the inserts are very sharp
Avoid touching them!
C
1 Put the desired insert in the insert holder.
C
2 Place the insert holder onto the tool
holder that stands in the bowl.
3 Put the lid on the bowl.
4 Put the ingredients in the feed tube.
B Cut large ingredients into pieces that fit into the
feed tube.
1
2
CLICK