Philips HR7755 - Manual (Page 12)

ENGLISH 12
C
◗ To crush ice cubes, place the ice cubes in the
jar, close the lid and use the pulse setting.
If ingredients stick to the wall of the blender jar:
1 Switch the appliance off and unplug it.
2 Open the lid.
Never open the lid while the appliance is still
running.
3 Use a spatula to remove the ingredients
from the wall of the jar.
Keep the spatula at a safe distance from the
cutting edges of the blade (approx. 2 cm).
B If you are not satisfied with the results, switch off
the appliance and let it run briefly a number of
times by turning the speed control to pulse
position.You can also try to get a better result by
stirring the ingredients with a spatula (not while
the blender is running!) or by pouring some of the
contents out in order to process a smaller amount.
B In some cases the ingredients are easier to blend
if you add some liquid, e.g. lemon juice when
blending fruit.
Meat mincer
The meat mincer can be used for mincing meat
and making sausages.
The meat mincer only works if the blender jar is
not mounted on the motor unit and if the screw
cap has been screwed onto the motor unit in
such a way that the dot on the screw cap is
directly opposite the dot on the motor unit.
C
1 Mount the gear housing onto the motor
unit.
You will hear a click when you have assembled
the gear housing correctly.
C
2 Insert the worm shaft into the cutter
housing, the plastic end first.
C
3 Place the cutter unit onto the worm shaft.
The cutting edges should be pointing
forwards.
C
4 Place the medium grinding disc or coarse
grinding disc - depending on the
consistency you prefer - onto the worm
shaft.
Make sure the notch of the grinding disc fits onto
the projection of the mincer head.
C
5 Fasten the screw ring onto the cutter
housing by turning it in the direction of the
arrow until it is properly fastened.