Philips HR7755 - Manual (Page 16)

ENGLISH 16
Solution
Turn the bowl and lid clockwise until you hear a click.
Make sure that the dot on the bowl is directly opposite
the dot on the motor unit and the line on the lid is
directly opposite the line on the bowl. Also make sure
the blender jar is not mounted and the screw cap has
been assembled properly.The dot on the screw cap
must be directly opposite the dot on the motor unit.
The automatic thermal cut-out system has probably cut
off the power supply to the appliance because it has
overheated. 1) Switch the appliance off (position 0).
2) Unplug the appliance. 3) Let the appliance cool down
for 60 minutes. 4) Put the mains plug in the socket.
5) Switch the appliance on again.
Check if you have really turned the bowl and the lid
clockwise as far as the point where you hear a click.
If both the blender and the food-processing bowl have
been mounted correctly, only the blender will function. If
you want to use the food-processing bowl, detach the
blender and close the fixing hole with the screw cap.
Problem
The appliance does
not go on when I turn
the speed control to
pulse or position 1 or
2.
The appliance has
suddenly stopped
running.
The kneading or
mixing accessory does
not turn
Both the blender jar
and the food-
processing bowl are
mounted on the
motor unit, but only
the blender works.
Troubleshooting
Application
times
10 - 60 sec.
60 - 180 sec.
10 - 60 sec.
10 - 60 sec.
depends on
quantity
10 - 60 sec.
Application
Chopping,
pureeing, mixing
Kneading
Slicing,
shredding,
grating
Blending,
pureeing
Mincing
Whisking,
whipping,
emulsifying
Accessory
P
{
g h k
D
Е
е
Accessories and applications