Philips HR7755 - Manual (Page 14)

ENGLISH 14
Cleaning
Before you start cleaning the appliance, switch the
appliance off and remove the plug from the wall
socket.
Clean the metal blade, the blade unit of the
blender and the inserts very carefully.Their cutting
edges are very sharp!
Make sure that the cutting edges of the blades
and the inserts do not come into contact with
hard objects.This could cause them to become
blunt.
B Certain ingredients may cause discolourations on
the surface of the accessories.This does not have
a negative effect on the accessories.The
discolourations usually disappear after some time.
C
1 Wind excess mains cord around the reel
on the back of the appliance.
2 Clean the motor unit with a damp cloth.
Do not immerse the motor unit in water
and do not rinse it either.
3 Always clean the parts that have come into
contact with food in hot water with
washing-up liquid immediately after use.
4 The bowl, the lid of the bowl, the pusher
and the accessories (except for the
blender jar) can also be cleaned in a
dishwasher.
These parts have been tested for dishwasher
resistance based on DIN EN 12875.
The blender jar is not dishwasher-proof!
5 To remove the lid, open it and then pull it
upwards.
Only remove the lid for cleaning purposes.
Blender quick-clean operation
C
1 Pour lukewarm water (not more than
0.5 litres) and some washing-up liquid into
the blender jar.
2 Close the lid.
C
3 Let the appliance run for a few moments
by turning the speed control to pulse
position (the appliance stops running when
you release the speed control).
4 Detach the blender jar and rinse it with
clean water.
Meat mincer
Meat left behind in the cutter housing can be
removed from the inside of the appliance by
passing a slice of bread through the cutter
housing.
1 Make sure the appliance is unplugged.