3 lldp-med example, Lldp-med, Xample – QTECH QSW-3400 Инструкция по настройке User Manual
Page 123
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
122
needs to fast send the LLDP
packets with LLDP-MED TLV,
this command is used to set the
value
of
the
fast
sending
packets,
the
no
command
restores the default value.
Admin mode
show lldp
Show the configuration of the
global LLDP and LLDP-MED.
show lldp [interface ethernet <IFNAME>]
Show the configuration of LLDP
and LLDP-MED on the current
port.
show lldp neighbors [interface ethernet <IFNAME>]
Show LLDP and LLDP-MED
configuration of the neighbors.
15.3 LLDP-MED Example
Basic LLDP-MED configuration topology
1) Configure Switch A
SwitchA(config)#interface ethernet1/1
SwitchA (Config-If-Ethernet1/1)# lldp enable
SwitchA (Config-If-Ethernet1/1)# lldp mode both(this configuration
can be omitted, the default mode is RxTx)
SwitchA (Config-If-Ethernet1/1)# lldp transmit med tlv capability