QTECH QSW-3400 Инструкция по настройке - Manual (Page 387)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
386
no vacl mac access-group {<700-1199> |
WORD} {in | out} vlan WORD
3. Configure VLAN-ACL of MAC-IP
Command Explanation
Global mode
vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} [traffic-statistic] vlan WORD
no vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} vlan WORD
Configure or delete MAC-IP VLAN-ACL.
(Egress filtering is not supported by switch.)
4. Configure VLAN-ACL of IPv6 type
Command Explanation
Global mode
vacl ipv6 access-group (<500-699> | WORD)
{in | out} (traffic-statistic|) vlan WORD
no ipv6 access-group {<500-699> | WORD}
{in | out} vlan WORD
Configure or delete IPv6 VLAN-ACL.
(Egress filtering is not supported by
switch).This switch only supports the ipv6
standard acl.
5. Show configuration and statistic information of VLAN-ACL
Command Explanation
Admin mode
show vacl [in | out] vlan [<vlan-id>]
Show the configuration and the statistic
information of VACL. (Egress filtering is not
supported by switch.)
6. Clear statistic information of VLAN-ACL
Command Explanation
Admin mode
clear vacl [in | out] statistic vlan [<vlan-id>]
Clear the statistic information of VACL.
(Egress filtering is not supported by switch.)
51.3 VLAN-ACL Configuration Example
A company’s network configuration is as follows, all departments are divided by different
VLANs, technique department is Vlan1, finance department is Vlan2. It is required that
technique department can access the outside network at timeout, but finance department are