QTECH QSW-3400 Инструкция по настройке - Manual (Page 66)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
65
3. Configure attributes of the cluster in the commander switch
4. Configure attributes of the cluster in the candidate switch
5. Remote cluster network management
no cluster member {id <member-id> | mac-
address <mac-addr>}
Command Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user Change automatically added members
into manually added ones.
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost keep-alive
messages that can be tolerated in the
cluster.
Admin mode
clear cluster nodes [nodes-sn <candidate-sn-
list> | mac-address <mac-addr>]
Clear nodes in the list of candidate
switches maintained by the switch.
Command Explanation
Global Mode
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-alive interval of the cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost keep-alive messages that
can be tolerated in the clusters.
Command Explanation
Admin Mode
rcommand member <member-id> In the commander switch, this command is used to
configure and manage member switches.
rcommand commander In the member switch, this command is used to
configure the commander switch.