QTECH QSW-3400 Инструкция по настройке - Manual (Page 55)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
54
Command Explanation
Global Mode
tftp-server enable
no tftp-server enable
Start TFTP server, the no command shuts down TFTP
server and prevents TFTP user from logging in.
(2) Modify TFTP server connection idle time
Command Explanation
Global Mode
tftp-server retransmission-timeout
<seconds>
Set maximum retransmission time within timeout
interval.
(3) Modify TFTP server connection retransmission time
Command Explanation
Global Mode
tftp-server retransmission-number
<number>
Set the retransmission time for TFTP server.
2.5.3.3 FTP/TFTP Configuration Examples
The configuration is same for IPv4 address or IPv6 address. The example only for IPv4
address.
Download nos.img file as FTP/TFTP client
Scenario 1: The switch is used as FTP/TFTP client. The switch connects from one of its ports
to a computer, which is a FTP/TFTP server with an IP address of 10.1.1.1; the switch acts as a
FTP/TFTP client, the IP address of the switch management VLAN is 10.1.1.2. Download
“nos.img” file in the computer to the switch.
10.1.1.2
10.1.1.1